Center za dokumentacijo
Prenesite podatkovne liste, tehnične opise, navodila za montažo in drugo.
The IQ System Controller 3 INT connects the home to the public electricity grid, the IQ Battery 5P with FlexPhase storage system, and IQ7 or IQ8 Series Microinverter circuits. It provides automatic transfer switch (ATS) functionality that automatically detects and transitions the home energy system from grid power to backup power in the event of a power cut. It consolidates interconnection equipment, IQ Gateway Metered, and IQ Relay functionality into a single enclosure and streamlines grid-independent capabilities of PV and storage installations by providing a consistent, pre-wired solution, including CTs.
No, an IQ System Controller is needed only if you desire to have a backup application. It is not needed in the case of grid-tied systems.
Yes, the IQ System Controller can support up to 80 A of current per phase.
No, the IQ Relay functionality is included in the IQ System Controller.
If you have a PV-only grid-tied system, you can purchase the IQ Battery 5P with FlexPhase and the IQ System Controller to complete your upgrade to backup.
Yes, the IQ System Controller supports backup with a string inverter. Refer to the system planning guide for detailed guidance.
No, the IQ System Controller can be used for backup only in systems having PV and batteries.
Please refer to the system planning guide at the documentation center for details on system sizing.
No, the MCBs and RCD need to be procured and installed in the IQ System Controller by the installer as per site requirements.
SSD is a switch that can be used for system shutdown during emergencies. This switch should be installed in an accessible location.